Setting" Menu - Epson EMP-TW20 User Manual

Save Memory
This can be used to save the current configuration menu settings. s page 22
1
Load Memory
*
This retrieves settings stored in the memory. s page 22
1
Auto Setup
*
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts images
to their optimum condition when the input signal is changed. The three automatically adjusted items are
"Tracking g ", "Position" and "Sync. g "
Reset
This returns all settings in the "Image" menu to their default settings, except for the settings that have been
saved using the "Save Memory" command. The "Save Memory" settings can be reset using the "Memory
Reset" menu. page 31

"Setting" menu

Screen
1
Position *
Use , ,
1
g
Progressive
*
(This can only be set when composite video or S-Video signals are being input or when 525i/625i signals from
component video g or RGB video are being input.)
•
OFF : Conversion of interlaced
screen. This is ideal for using when viewing images with a large amount of movement.
•
ON :Interlaced (i) signals are converted into progressive (p) signals. This is ideal for using when
viewing still images.
1
g
Aspect *
Selects the aspect mode. s page 18
or to move the display position for images.
g (i) signals to progressive (p) signals is carried out for each field in the
*1 The setting values are stored separately for each image source and signal type.
Configuration Menu Functions
Only displayed for RGB-video/Computer
27