Saving A User's Logo - Epson EMP-53 User Manual

Saving a User's Logo

You can record the image that is currently being projected as a user's logo.
Use the remote control to carry out the operations for recording a user's logo.
TIP
When a user's logo is recorded, the previous user's logo will be
erased.
PROCEDURE
Project the image that you would like to use as a
1
user's logo, and then press the [Menu] button on the
remote control.
Select the "User's Logo" menu, and then press the
2
[Enter] button.
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
[ ]: Select [ ]: Execute
TIP
If keystone correction or E-Zoom have been carried out, they will be
canceled when the "User's Logo" menu is selected.
Execute
[Menu]: Exit
Select "Yes" in the sub-menu, and then press the
3
[Enter] button.
User's Logo
Accept the present image as user's logo?
YES
TIP
When you press the [Enter] button, the
cancelled, so that when you are projecting images that have a
resolution that is different from the number of pixels on the
projector's panel, and when you are projecting video images, the
display size will change.
NO
resize display will be
81