Adjusting The Tracking - Epson EMP EMP-81 User Manual

Adjusting the Image Quality

Adjusting the Tracking

If vertical stripes appear in the projected
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the Trackingg manually using the
following procedure.
PROCEDURE
Press the [Menu] button on the remote control or the
1
projector's control panel, and then select "Tracking"
from the "Signal" configuration menu.
For details on this operation, refer to "Using the Configuration
sp.66
Menus".
Tilt the [ ] button on the remote control or press the
2
[ ] and [ ] buttons on the projector's control panel
to adjust the tracking value until the vertical stripes
disappear from the images.
The tracking value increases or decreases each time a button is
pressed.
After making the adjustment, press the [Menu] button
3
to exit the configuration menu.
TIP
The image will flash when continuous tracking adjustment is carried
out, but this is normal.
41