Projecting Rgb Video Images - Epson EMP EMP-81 User Manual

Connecting to a Video Source

Projecting RGB Video Images

Use the accessory computer cable to make the connections.
To RGB output port
Computer cable
(accessory)
TIP
• The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. If this happens, set the input source to
"Computer1" or "Computer2".
• If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
sp.33
projected.
To [Computer1/Component Video1]
or [Computer2/Component Video2]
port (blue)
sp.55
25