Replacing Consumables; Lamp Replacement Period - Epson EMP EMP-81 User Manual

Maintenance

Replacing Consumables

This section describes how to replace the lamp and the air filters.

Lamp Replacement Period

It is time to replace the lamp when:
• The message "Replace the Lamp." appears on the screen when
projection starts.
.
• When the Lamp indicator is flashing orange.
• The projected image gets darker or starts to deteriorate.
A message will be displayed.
Flashing orange
TIP
• The lamp replacement message is set to appear after the following
periods of time in order to maintain the initial brightness and quality
of the projected images.
· When used continuously at high brightness: Approx. 1900 hours
· When used continuously at low brightness : Approx. 2900 hours
sp.59
"Brightness Control"
• If you continue to use the lamp after this period, the possibility of the
lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• Depending on the characteristics of the lamp and on the way it has
been used, the lamp may become darker or stop working before the
lamp warning message appears. You should always have a spare
lamp ready in case it is needed.
• Contact your dealer for a spare lamp.
85