Connecting To A Video Source; Projecting Composite Video Images - Epson EMP EMP-81 User Manual

Connecting to a Video Source

CAUTION
When connecting the projector to video equipments, take the
following precautions.
• Turn off the power for both the projector and the video equipments
before connecting them. If the power for either device is on at the
time of connection, damage may result.
• Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, a malfunction or
damage to the connector or port may result.
• Do not bind the power cable and the connecting cable together. If the
power cable and the connecting cable are bound together, image
interference or errors in operation may result.
Projecting Composite Videog
Use a commercially- available A/V cable to make the connection.
To video output port (yellow)
A/V cable
(commercially-available)
To audio output
port sp.26
TIP
If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
sp.33
projected.
23
Images
To [Video] port (yellow)
To [Audio] port
Connect the cable using the
audio adapter that is supplied
with the projector. sp.26