Turning The Projector Off - Epson EMP EMP-81 User Manual

Turning the Projector Off

Follow the procedure below to turn off the power of the projector.
PROCEDURE
Turn off the power for the signal sources that are
1
connected to the projector.
Check that the power for all connected components has been
turned off.
Press the [Power] button.
2
Remote control
The following confirmation message will appear.
If you do not want to turn the power off, press any button except
the [Power], [Page down], [Page up] and [Num] button.
If you do not press any button, the message will disappear
automatically after seven seconds. (The power will not turn off
at this time.)
If the message "The projector is over heating. Make sure nothing is
blocking the air vent, and clean or replace the air filter." appears on
the screen, press the [Enter] button on either the projector's control
panel or on the remote control to turn the power the air filters.
sp.84
3
Projector
CAUTION
Press the [Power] button once more.
The lamp will switch off. The Power indicator will flash orange
and cool-downg will start.
The cool-down period lasts for about 20 seconds.
When the cool-down is complete, a "pip-pip" confirmation
buzzer will sound, and the Power indicator will change to light
orange.
Stops flashing and lights orange
34