Table of Contents
Advertisement
5
6
Note
7
Note
4-14
®
NetWare
Settings (Windows)
Check the Frame Type box and make sure the setting is correct for
®
your NetWare
network.
If you intend to use the burst mode, select On for NCP Burst Mode.
z The burst mode is used in the queue server mode to transfer data rapidly at very
high speed during printing.
z Normally, leave this setting on.
For Print Application select the service to use.
z Only one service can be selected here and enabled. More than one service cannot
be enabled at the same time here.
Advertisement
Table of Contents
