Setting Tcp/Ip Protocol For The Printer; Setting Up With A Web Browser (Remote Ui) - Canon imagePROGRAF W8200 Network Manual

Network guide

Hide thumbs Also See for imagePROGRAF W8200:

Table of Contents

Setting TCP/IP Protocol for the Printer

Important

2-8

TCP/IP Network Settings (Windows)

You can use your Web browser on your computer with the Remote UI, the

software built into the network interface, to perform the printer protocol

settings.

Start the Web Browser, enter the following URL for the Address, then

press the Enter key.

http://<Printer IP address or name>/

Example: http://XXX.XXX.XXX.XXX/

z For the Web Browser, use Netscape Navigator/Communicator 4.04 or later, or use

Internet Explorer 4.01SP1 or later. However, Netscape Navigator Version 6 or later

is not compatible.

z A connection through a Proxy Server cannot be used. If you are using a network

environment with a Proxy Server, use the "Proxies" server setting in the Web

Browser to add the printer IP address to the "Exceptions" text box (the address not

used by the Proxy Server). (Performing this setting may differ, depending on the

network environment.)

z Use the Web Browser to enable JavaScript and Cookie so these features can be

used.

z If more than one Remote UI is being used, then the most recently used settings

remain enabled. Starting and using only one Remote UI at a time is recommended.

Table of Contents