Table of Contents
Advertisement
3
Enter the MAC address into the MAC Address box then click the Next
button.
The utility searches for the printer on the network and when the printer is
found, the protocol settings dialog box opens.
4
For the NetWare Frame Type, select the frame type in use from the
list, for TCP/IP Frame Type select ETHERNET II, for IP Address enter
the IP address assigned to the printer, then click the Next button.
Note
z The IP address setting is required here to enable the printer protocol setting to be
conducted with the Web browser (Remote UI).
5
Confirm the settings then click the Finish button.
The printer frame type protocol settings are changed.
Setting the Printer Frame Type
4-5
Advertisement
Table of Contents
