Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
500-GB, 7200-rpm hard drive
500-GB, 5400-rpm hard drive
320-GB, 7200-rpm hard drive
250-GB, 7200-rpm hard drive
250-GB, 5400-rpm hard drive
160-GB, 7200-rpm hard drive
160-GB, 7200-rpm hard drive (Seagate only)
160-GB, 5400-rpm hard drive
128-GB solid-state drive (SSD)
80-GB solid-state drive
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
computer.
50
Chapter 4 Removal and replacement procedures
Battery on page
44).
Spare part number
532108-001
519893-001
501118-001
495059-001
495058-001
483186-001
580297-001
514071-001
574721-001
501113-001