Usb/Audio Board - HP 8530p - EliteBook - Core 2 Duo 2.4 GHz Maintenance And Service Manual

USB/audio board

Description
USB/audio board (includes USB cable and audio cable)
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
Remove the USB/audio board:
1. Position the computer right-side up, with the front toward you.
2. Disconnect the cable from the USB/audio board (1).
3. Remove the Torx T82.5×8.0 screw (2) that secures the USB/audio board to the base enclosure.
94 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see
Top cover (see Top cover on page
Fan (see Fan on page 79)
Heat sink (see Heat sink on page
Modem module (see Modem module on page
System board (see System board on page
44).
50)
46)
60)
65)
Display assembly on page
74)
81)
88)
68)
63)
Spare part number
495065-001