Top Cover - HP 8530p - EliteBook - Core 2 Duo 2.4 GHz Maintenance And Service Manual

Top cover

Description
For use with HP EliteBook 8530w computer models (includes fingerprint reader board and cable)
For use with HP EliteBook 8530p computer models (includes fingerprint reader board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
Remove the top cover:
1. Turn the computer upside-down, with the front toward you.
2. Remove the two rubber screw covers (1). The rubber screw covers are included in the Plastics Kit,
spare part number 495076-001.
3. Remove the seven Torx T8M2.5×7.0 screws (2) that secure the top cover to the base enclosure.
74 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see
44).
50)
46)
60)
65)
Display assembly on page
Spare part number
502336-001 or
495069-001
502335-001 or
495068-001
68)