HP 8530p - EliteBook - Core 2 Duo 2.4 GHz Maintenance And Service Manual page 112

Select
Built-In Device Options
102 Chapter 5 Computer Setup
To do this
NOTE: Availability of the options above varies by
computer model.
●
Enable/disable secondary battery fast charge (enabled by
default).
●
Enable/disable HP QuickLook 2 (enabled by default).
●
Enable/disable Virtualization Technology (select models
only; disabled by default).
● Enable/disable TXT (Intel Trusted Execution Technology)
(select models only; disabled by default).
●
Enable/disable Dual-Core CPU (select models only;
enabled by default).
●
Enable/Disable Unified Extensible Firmware Interface
(UEFI) mode (disabled by default).
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable embedded WWAN device radio (select
models only; enabled by default).
●
Enable/disable embedded Bluetooth device radio
(enabled by default).
●
Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Set the wake on LAN state. Options include the
following:
◦
Disabled
◦
Boot to Network (set by default)
◦ Follow Boot Order
●
Enable/disable the fingerprint device (enabled by
default).
● Enable/disable a modem device (enabled by default).
● Enable/disable the embedded WLAN device (enabled by
default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
●
Enable the ambient light sensor (enabled by default).
●
Enable/disable the Notebook Multibay device (enabled by
default).
● Enable/disable the integrated camera (select models
only; enabled by default).