TouchPad
NOTE:
All TouchPad spare part kits include a TouchPad cable. The TouchPad cable is also included
in the Cable Kit, spare part number 495064-001.
Description
With 3 TouchPad buttons and 3 pointing stick buttons for use with keyboards with pointing stick
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
Remove the TouchPad:
1.
Turn the top cover upside-down, with the front toward you.
2.
Remove the four Phillips PM2.0×3.0 screws that secure the TouchPad bracket to the top cover.
Battery on page
44).
Hard drive on page
50)
Optical drive on page
Keyboard on page
60)
Switch cover on page
Display assembly on page
Top cover on page
74)
46)
65)
68)
Component replacement procedures
Spare part number
506807-001
77