Highlighting Your Presentation
You can highlight areas on the screen using the numbered buttons on
the remote control. You can use these "special effects" features to
annotate your presentation slides or call attention to your most
important points. The following three highlighting tools are available:
Pointer or cursor stamp (button
I
Spotlight (button
I
2
I
Bar (button
)
3
You can customize the highlighting tools through the Effect menu.
See page 50 for instructions.
Using the Pointer
You can choose from three types of pointers and place them anywhere
on your screen.
1. To activate the pointer tool, press button
A pointing hand appears in the center of the screen. To change it
to an arrow, press
arrow.
2. Press the side of the
and finger) to move the arrow wherever you want it.
3. To "paste" the pointer on the screen, press down in the center of
the
button. You can then continue to work with another
pointer, moving it around the screen or pasting it wherever you
want.
4. To erase the pointer(s) pasted on the screen and cancel the effect,
press
.
Esc
)
1
)
again. Press
a third time to see a different
1
1
button (or grasp it between your thumb
on the remote control.
1
A/V Mute
Freeze
E-Zoom
spot-
light
pointer
note
You can use the projector's
Effect menu to select different
pointers. See page 50.
Using the Remote Control
Power
bar
37