Connecting An S-Video Cable - Epson PowerLite 600p User Manual

Connecting an S-Video Cable

If your video source has an S-Video jack, you can use it to project a
higher quality video image. However, you'll need an S-Video cable,
which may be included with your video source, or can be purchased
separately.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Insert one end of an S-Video cable into the projector's
connector.
2. Insert the other end into the S-Video output port of your video
source.
3. If your video source has RCA audio, you can use the A/V cable to
connect to the projector's
If your video source has a stereo mini-jack instead of RCA jacks,
you can use a stereo mini-jack cable (not included). Connect it to
the jack on the projector.
Audio 1
(white) and
Audio L
S-Video cable
A/V cable
S-Video
(red) jacks.
R
S-Video connector
Setting Up the Projector
17