Installing The Projector - Epson PowerLite 600p User Manual

note
See "Positioning the
Projector" on page 10 for
more information.
Appendix A: Connecting to Additional Equipment
82

Installing the Projector

The projector can be installed for four different viewing setups: front
projection, ceiling mounting, rear projection onto a semi-transparent
screen, or rear/ceiling projection, as shown:
front projection
rear projection
To project from overhead, you'll need to select
projector's Advanced menu. To project from the rear, select
. See "Setting Advanced Features" on page 55.
Proj
If you're mounting the projector on the ceiling and you place it above
screen level, you'll have to tilt it down to position the image on-screen.
This causes the image to lose its square shape. You can then correct
the distortion by using the
menu system (see "Customizing Projector Features" on page 53) or by
using the
Keystone
If you place the projector's lens so it's level with the top of the screen,
the image will be square and you won't have to adjust it. If you place
the lens lower than the top of the screen, you'll have to tilt the
projector upward if you want to fill the whole screen with the image.
ceiling mounting
rear/ceiling projection
function in the projector's
V Keystone
buttons on the projector's control panel.
in the
Ceiling
Rear