120
6 • Troubleshooting
Light
Color
Temperature
Flashing orange
Red
Flashing red
Projection
Red or
lamp
flashing orange and red
Flashing red
Power
Flashing green
Flashing orange
Steady Green
Steady Orange
Off
See the following pages for information on what to do when you see
these warning lights or encounter other specific problems with the
projector.
The power light is flashing orange and you cannot turn on the
projector.
The projector is cooling down. Wait until the light turns off and then
turn on the projector.
Meaning
The projector is too hot.
The projector has turned off automatically because of
overheating.
There is a problem with the cooling fan or temperature
sensor. Call a service representative.
The lamp needs to be replaced. See "Replacing the
Lamp" in Chapter 5 for instructions.
There is a problem with the projection lamp or lamp
power supply, a lamp fuse, or a circuit malfunction in
the projector.
The projector is warming up. Allow about 30 seconds.
The projector is cooling down.
Power and projector lamp are on.
The projector is in sleep mode.
There is an internal projector problem, or the power to
the projector has been cut off.