Setting Effects Options - Epson PowerLite 5500C User Manual

Setting Effects Options

Once you have assigned functions to one or more Effects buttons,
you can specify detailed options for each function.
To set detailed options, click Detail Setting on the ELP Link III
main dialog box. A dialog box similar to the following appears.
(The options and tabs displayed depend on which functions are
currently assigned to the Effects buttons.)
Click the tab for the function you want to adjust, then make any
settings you wish.
To test each setting, click the Test button and use the effect as
described on page 92. To end the test, click the right mouse button.
(If you are using the remote control as a mouse pointer, use the
bottom and top multi-purpose buttons, respectively.)
To save the changes, click OK.
96
4 • Using the ELP Link III Software