Page 1 ® PowerLite 5510/5520W/5530U/5535U User's Guide...
Page 3: Table Of Contents
Contents PowerLite 5510/5520W/5530U/5535U User's Guide................11 Introduction to Your Projector ......................... 12 Projector Features..........................12 Product Box Contents........................13 Additional Components ........................ 15 Additional Projector Software and Manuals ................... 15 Optional Equipment and Replacement Parts................. 16 Warranty and Registration Information ..................17 Notations Used in the Documentation ....................
Page 4 Connecting to a Component Video Source ................38 Connecting to a Video Source for Sound .................. 39 Connecting to an HDBaseT Transmitter ..................40 Connecting to an External Computer Monitor................41 Connecting to External Speakers ....................42 Attaching and Removing the Cable Cover..................43 Installing Batteries in the Remote Control ..................
Page 5 Using Basic Projector Features ....................... 80 Turning On the Projector ........................80 Using the Home Screen......................... 82 Turning Off the Projector ........................83 Selecting the Language for the Projector Menus................84 Resizing the Image with the Zoom Ring ..................... 85 Focusing the Image Using the Focus Ring..................
Page 6 Adjusting Projector Features ......................... 112 Shutting Off the Picture and Sound Temporarily ................112 Stopping Video Action Temporarily ....................113 Zooming Into and Out of Images ...................... 114 Projector Security Features......................115 Password Security Types ......................115 Setting a Password ......................... 116 Selecting Password Security Types..................
Page 7 Adjusting the Menu Settings ........................146 Using the Projector's Menus......................146 Image Quality Settings - Image Menu ....................148 Input Signal Settings - Signal Menu....................150 Projector Feature Settings - Settings Menu..................153 Projector Setup Settings - Extended Menu..................156 Projector Network Settings - Network Menu..................
Page 8 Solutions When Only a Partial Image Appears ................194 Solutions When the Image is Not Rectangular ................194 Solutions When the Image Contains Noise or Static ..............195 Solutions When the Image is Fuzzy or Blurry ................195 Solutions When the Image Brightness or Colors are Incorrect ............ 196 Solutions to Sound Problems ......................
Page 9 Binding Arbitration and Class Waiver ....................275 Trademarks ............................278 Copyright Notice..........................278 A Note Concerning Responsible Use of Copyrighted Materials........... 279 Copyright Attribution ........................279...
Page 11: Powerlite 5510/5520W/5530U/5535U User's Guide
PowerLite 5510/5520W/5530U/5535U User's Guide Welcome to the PowerLite 5510/5520W/5530U/5535U User's Guide. For a printable PDF copy of this guide, click here.
Page 12: Introduction To Your Projector
Where to Go for Additional Information Projector Part Locations Projector Features The PowerLite 5510, 5520W, 5530U, and 5535U projectors include these special features: Bright, high-resolution projection system • Up to 5500 lumens of brightness (white light output and color light output) Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions.
Page 13: Product Box Contents
• Epson's Instant Off and Direct Power On features for quick setup and shut down • Support for Crestron RoomView network monitoring systems • Network message broadcast system to project timely messages to all networked projectors (Windows only) Note: The PowerLite 5530U/5535U is shown in most illustrations in this manual, unless noted otherwise.
Page 14 Make sure your projector box included all of these parts: Projector with lens cap Cable cover Remote control Remote control batteries (two AA alkaline) Power cord VGA computer cable Projector documentation CD Projector software CD Parent topic: Projector Features...
Page 15: Additional Components
This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options. Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.
Page 16: Optional Equipment And Replacement Parts
Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Projector software Manual Description EasyMP Monitor...
Page 17: Warranty And Registration Information
In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.
Page 18: Notations Used In The Documentation
• If you still need help after checking this manual and any other sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Parent topic:...
Page 19: Projector Parts - Front/Top
Parent topic: Introduction to Your Projector Projector Parts - Front/Top Exhaust vent Focus ring Projection lens Zoom ring Remote receivers Status lights Air filter cover/intake vent Air filter cover latch Wireless LAN module cover Wireless LAN module light...
Page 20: Projector Parts - Rear
Cable cover Vertical lens shift dial Lens shift dial lock Horizontal lens shift dial Lamp cover Kensington security slot Parent topic: Projector Part Locations Projector Parts - Rear AC input Interface ports Control panel Speaker Parent topic: Projector Part Locations...
Page 21: Projector Parts - Interface Ports
Projector Parts - Interface Ports Computer port BNC ports Monitor Out port Audio Out port RS-232C port Cable clip slot Remote port Audio2 port Audio1 port Service port HDMI2 port HDMI1 port HDBaseT port (PowerLite 5520W/5530U/5535U) Network LAN port Parent topic: Projector Part Locations...
Page 22: Projector Parts - Base
Projector Parts - Base Security cable attachment point Rear feet Screw hole for cable cover Mounting bracket holes Front adjustable foot Parent topic: Projector Part Locations...
Page 23: Projector Parts - Control Panel
Projector Parts - Control Panel Power button (turns on the projector) Source Search button (searches for connected sources) A/V Mute button (turns the video and audio on or off) Left arrow button and displays the Control Panel Lock screen Down arrow button and displays a test pattern Enter button (selects options) Right arrow button and displays the Info menu Esc button (cancels/exits functions)
Page 24: Projector Parts - Remote Control
Projector Parts - Remote Control...
Page 25 On button (turns on the projector) Standby button (turns off the projector) Source buttons (select an image source) User1, User2, and User3 buttons (open menu assigned by user) Aspect button (selects the image aspect ratio) Auto button (automatically adjusts computer images) Test Pattern button (displays a test pattern) Freeze button (stops video action) Menu button (accesses projector menu system)
Page 26 Color Mode button (selects display modes) Search button (searches for connected sources) Light button (lights up the remote control buttons temporarily) Indicator light (lights up when the remote control is in use) Remote control signal emitter (emits remote control signals) Parent topic: Projector Part Locations...
Page 27: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Attaching and Removing the Cable Cover Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Page 28 Rear Front ceiling Rear ceiling...
Page 29 Note: Be sure to leave at least 20 inches (50 cm) of space in front of the air exhaust and intake vents and, when setting up multiple projectors, 20 inches (50 cm) of space between the projectors. If you mount the projector to the ceiling, it can be installed at the following angles: •...
Page 30: Projection Distance
Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada).
Page 31 PowerLite 5510 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Vertical lens shift from bottom to top (2) Wide to Tele 50 inches 50 to 103 inches –32.7 to 2.7 inches (–83 to 7 cm)
Page 32: Projector Connections
Projector Connections See these sections to connect the projector to a variety of projection sources. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly. Connecting to Computer Sources Connecting to Video Sources Connecting to an HDBaseT Transmitter...
Page 33: Connecting To A Computer For Hdmi Video And Audio
3. Connect the other end to a Computer port on the projector. 4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Related tasks Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.
Page 34: Connecting To A Computer For 5 Bnc Video
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. Note: If you have problems hearing audio through the HDMI connection, you can use one of the projector's audio ports instead to play sound.
Page 35: Connecting To A Computer For Sound
2. Connect the 5 BNC connectors to the projector's BNC ports. Parent topic: Connecting to Computer Sources Related references Additional Components Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it to the projector's HDMI port, you can still play sound through the projector's speaker system.
Page 36: Connecting To Video Sources
2. Connect the other end to the Audio port that corresponds to the Computer or BNC port you are using. Parent topic: Connecting to Computer Sources Related references Additional Components Related tasks Connecting to an External Computer Monitor Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector.
Page 37: Connecting To A Component-To-Bnc Video Source
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. Note: If you have problems hearing audio through the HDMI connection, you can use one of the projector's audio ports instead to play sound.
Page 38: Connecting To A Component Video Source
2. Connect the BNC connectors to the projector's R/Cr/Pr, G/Y, B/Cb/Pb ports. Parent topic: Connecting to Video Sources Related references Additional Components Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable.
Page 39: Connecting To A Video Source For Sound
2. Connect the VGA connector to a Computer port on the projector. 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references...
Page 40: Connecting To An Hdbaset Transmitter
2. Connect the other end of the cable to the projector's Audio port that corresponds to the Computer or BNC port you are using for video. Parent topic: Connecting to Video Sources Related tasks Connecting to an External Computer Monitor Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable.
Page 41: Connecting To An External Computer Monitor
3. Connect the other end to the projector's HDBaseT port. Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting it to your video device or computer. 4. Turn on the projector and HDBaseT transmitter. Note: To enable communication from the Ethernet and serial ports on the transmitter, select On as the Control Communications setting in the projector's Extended menu.
Page 42: Connecting To External Speakers
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly. 1. Make sure your computer is connected to the projector's Computer or BNC port. 2. Connect the external monitor's cable to your projector's Monitor Out port. Note: If you do not see an image on the external monitor, you may need to change the Monitor Out setting in the Extended menu.
Page 43: Attaching And Removing The Cable Cover
If you want to output audio from the external speakers when the projector is turned off, you need to select Communication On for the Standby Mode setting and Always On for the A/V Output setting in the projector's Extended menu. Note: The projector's built-in speaker system is disabled when you connect external speakers.
Page 44 1. Bundle the cables together using a band or other fastener (not provided). Caution: Do not bundle the power cord to the other cables. Otherwise, a fire may occur. 2. Place the cable cover on the projector as shown, guiding the cables through the notch on the base of the cable cover.
Page 45: Installing Batteries In The Remote Control
3. Tighten the cable cover screw. To remove the cover, loosen the cover screw and pull the cover off of the projector. Parent topic: Setting Up the Projector Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual.
Page 46 1. Remove the battery cover. 2. Insert the batteries with the + and – ends facing as shown.
Page 47 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Page 48: Using The Projector On A Network
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the Epson network software. Connecting to a Wired Network...
Page 49: Selecting Wired Network Settings
2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port.
Page 50 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
Page 51 PJLink protocol for projector control. • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) •...
Page 52: Wireless Network Projection
You can project over a wireless network. To do this, you must set up your projector and computer for wireless projection. Note: The Epson 802.11b/g/n wireless LAN module is not included with your projector and is optional. After setting up the projector as described here, install the network software from the included CD or download the software and manuals as necessary.
Page 53: Installing The Wireless Lan Module
Optional Equipment and Replacement Parts Installing the Wireless LAN Module To use the projector over a wireless network, install the optional Epson 802.11b/g/n wireless LAN module. Do not install any other type of wireless LAN module. Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting wirelessly.
Page 54 3. Loosen the screw securing the wireless LAN module cover, then remove the cover. 4. Insert the wireless LAN module into the port.
Page 55: Using Quick Wireless Connection (Windows)
5. Replace the wireless LAN module cover and secure it using the screw you loosened. 6. Close the air filter cover. 7. Plug in and turn on the projector. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts Using Quick Wireless Connection (Windows) You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly.
Page 56: Selecting Wireless Network Settings Manually
2. Turn on the projector. 3. Press the LAN button on the remote control. You see the LAN standby screen. 4. Verify that an SSID and IP address are displayed. 5. Remove the wireless LAN module from the projector. 6. Insert the USB key into the same port used for the wireless LAN module. You see a projected message that the network information update is complete.
Page 57 1. Turn on the projector. 2. Press the Menu button. 3. Select the Network menu and press Enter. 4. Make sure the Wireless LAN Power setting is set to On. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter.
Page 58 PJLink protocol for projector control. • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in the Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) •...
Page 59: Wireless Lan Menu Settings
8. Select the Wireless LAN menu and press Enter. 9. Select the settings on the Wireless LAN menu as necessary for your network. 10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. After you complete the wireless settings for your projector, you need to select the wireless network on your computer, or iOS or Android device.
Page 60 Setting Options Description Search Access Point To Search View Search for available wireless network access points in Advanced connection mode SSID Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is connecting to Security Open Selects the type of wireless...
Page 61: Selecting Wireless Network Settings In Windows
Setting Options Description SSID Display Selects whether to display the SSID on the network standby screen IP Address Display Selects whether to display the IP address on the network standby screen IPv6 Settings IPv6 Selects the IPv6 settings when you connect the projector to the Auto Configuration network using IPv6 Use Temporary Address...
Page 62: Setting Up Wireless Network Security
Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following security options to match the settings used on your network: • WPA/WPA2-PSK security (Advanced connection mode) •...
Page 63: Using A Qr Code To Connect A Mobile Device
After you select the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app. Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit epson.com/iprojection (U.S.) or...
Page 64: Wireless Network Projection From A Mobile Device Or Windows Computer (Screen Mirroring)
Note: If you do not see the QR code after pressing the LAN button, press Enter to display it. 8. Start Epson iProjection on your mobile device. 9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit epson.com/iprojection...
Page 65: Screen Mirroring Restrictions
Screen Mirroring Restrictions Selecting Screen Mirroring Settings Connecting for Screen Mirroring with Miracast Connecting for Screen Mirroring with a Windows 8.x/10 Computer Parent topic: Wireless Network Projection Screen Mirroring Restrictions Note the following when using Screen Mirroring features (PowerLite 5520W/5530U/5535U): •...
Page 66 2. Select the Network menu and press Enter. 3. Set the Screen Mirroring setting to On. 4. Select Screen Mirroring Settings and press Enter. 5. Select the Screen Mirroring Settings options as necessary. 6. When you finish selecting settings, select Set and follow the on-screen instructions to save your settings and exit the menus.
Page 67: Connecting For Screen Mirroring With Miracast
Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring) Connecting for Screen Mirroring with Miracast If your mobile device supports Miracast, you can connect it to the projector wirelessly and project images and sound (PowerLite 5520W/5530U/5535U). 1.
Page 68: Setting Up Projector Network E-Mail Alerts
You see the Screen Mirroring standby screen. 3. Do one of the following: • Windows 10: Open Action Center and select Connect. • Windows 8.x: Select Devices > Project > Add a wireless display. 4. Select your projector's Display Name from the list. 5.
Page 69 4. Select the Notifications menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server setting. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button.
Page 70: Network Projector E-Mail Alert Messages
• The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...
Page 71 4. Select the Notifications menu and press Enter. 5. Turn on the SNMP setting. 6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button.
Page 72: Controlling A Networked Projector Using A Web Browser
8. If you want to use the Secure HTTP protocol to encrypt communication when using Web Control, turn on the Secure HTTP setting and import the web server certificate to the Web Server Cert. setting. 9. If available, select the Priority Gateway setting for your network. 10.
Page 73 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen. Select Basic Control to control the projector remotely. Select OSD Control Pad to change the projector's menu settings. Select Status Information to view the projector's status.
Page 74: Web Control Options
Web Control Options Basic Control Note: If the Remote Password is set to On, you need to enter your user name and password. (The default username is EPSONREMOTE and the default password is guest). Returns to the Home screen Turns on the projector Input source selection controls A/V Mute button control Volume button controls...
Page 75 Returns to the Home screen Displays the projector's setting menus Use your finger or mouse to navigate the menus Returns settings to their default values Returns to the previous menu Displays help topics Note: You cannot change some settings using Epson Web Control.
Page 76 Test Pattern screen Displays available test patterns; select to project a test pattern Turns off test pattern display Status Information Returns to the Home screen Displays a list of monitored settings Displays the setting status...
Page 77: Crestron Roomview Support
Crestron RoomView lets you control and monitor your projector using a web browser. Note: You cannot use the Epson Web Control feature or the Message Broadcasting plug-in for EasyMP Monitor when you use Crestron RoomView.
Page 78: Controlling A Networked Projector Using Crestron Roomview
4. Select the Others menu and press Enter. 5. Set the Crestron RoomView setting to On to allow the projector to be detected. Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the EasyMP Monitor software. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 79 You see this screen: 3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons.
Page 80: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Resizing the Image with the Zoom Ring Focusing the Image Using the Focus Ring Setting the Screen Type Adjusting the Image Position Using Lens Shift Adjusting the Image Position Using Screen Position...
Page 81 1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power, but is not yet turned on (it is in standby mode). Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
Page 82: Using The Home Screen
• Press the Home button and select the source you want to project on the Home screen. Using the Home Screen Parent topic: Using Basic Projector Features Related references Projector Setup Settings - Extended Menu Projector Light Status Using the Home Screen You can select input sources and other frequently used options from the Home screen.
Page 83: Turning Off The Projector
Display the QR code Display the Help screen Display the projector's menus Select customizable menu options Select to change the Power Consumption setting Select to change the Color Mode Note: You can select the customizable menu options using the Custom Function 1 and Custom Function 2 settings in the Extended menu.
Page 84: Selecting The Language For The Projector Menus
The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Page 85: Resizing The Image With The Zoom Ring
6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Resizing the Image with the Zoom Ring 1. Turn on the projector and display an image. Wait 30 minutes after turning on the projector before setting the focus, zoom, and lens shift for maximum accuracy.
Page 86: Setting The Screen Type
2. To sharpen the image focus, rotate the projector’s focus ring. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Setting the Screen Type You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you are using.
Page 87: Adjusting The Image Position Using Lens Shift
5. Select your screen's aspect ratio and press Enter. 6. Press the Menu button to exit. 7. Adjust the aspect ratio for the projected image, if necessary. Parent topic: Using Basic Projector Features Related concepts Image Aspect Ratio Adjusting the Image Position Using Lens Shift If you cannot install the projector directly in front of the screen, you can adjust the position of the projected image using the lens shift feature.
Page 88 3. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. PowerLite 5510 Center of lens Projected image when the lens is set to the home position...
Page 89 Maximum range: V × 58% Note: You cannot move the image upward when the lens is shifted horizontally all the way. PowerLite 5520W/5530U/5535U Center of lens Projected image when the lens is set to the home position 4. When you are finished, slide the lens shift dial lock as shown to lock the dials. Parent topic: Using Basic Projector Features...
Page 90: Adjusting The Image Position Using Screen Position
Adjusting the Image Position Using Screen Position You can adjust the image position if there are margins between the edge of the image and the projected screen frame. Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 for a WXGA/WUXGA projector model or 4:3 for a XGA projector model.
Page 91: Available Test Pattern Image Adjustments
1. Turn on the projector. 2. Press the Test Pattern button on the remote control or the down arrow button on the control panel. 3. Press the left or right arrow button on the remote control or press Enter on the control panel to cycle through the available test patterns.
Page 92: Image Shape
2. To adjust the image height, rotate the front foot to extend or retract it. 3. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Image Shape...
Page 93: Correcting Image Shape With H/V Keystone
Correcting Image Shape with H/V Keystone You can use the projector's H/V Keystone setting to correct the shape of an image that is unevenly rectangular on the sides. Note: You cannot combine H/V Keystone correction with other image shape correction methods. 1.
Page 94 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. Note: You can also access the geometric adjustment screen by pressing the Geometry button on the remote control or the up arrow button on the control panel. 5.
Page 95 6. Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone correction and to adjust the image shape as necessary. V-Keystone V-Balance H-Keystone H-Balance...
Page 96: Correcting Image Shape With Quick Corner
7. When you are finished, press Esc. After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.
Page 97 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen.
Page 98: Correcting Image Shape With Arc Correction
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc. Parent topic: Image Shape Related references...
Page 99: Selecting An Image Source
4. Select the Geometry Correction setting and press Enter. 5. Select the Arc Correction setting and press Enter. Then press Enter again. You see the Arc Correction adjustment screen. Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes.
Page 100 1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD or other video media and press its play button, if necessary. 3. Do one of the following: • Press the Search button on the remote control or the Source Search button on the projector until you see the image from the source you want.
Page 101: Remote Control Operation
Computer port source Network port source (LAN, EasyMP Multi PC Projection, or Epson iProjection) Screen Mirroring source (PowerLite 5520W/5530U/5535U) BNC port source HDBaseT port source (PowerLite 5520W/5530U/5535U) • Press the Home button on the remote control and select your image source.
Page 102 Make sure that you aim the remote control at the projector's receivers within the angles listed here. 49 feet (15 m) 60° 30° 20° 10° 35° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.
Page 103: Projection Modes
Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount. •...
Page 104: Image Aspect Ratio
1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio...
Page 105: Changing The Image Aspect Ratio
Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: Set the Screen Type setting in the projector's Extended menu before changing the aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2.
Page 106: Color Mode
Screen Type setting Available aspect ratios Auto, Normal, 4:3, 6:9, Native* 16:9 Auto, Normal, Full, Zoom, H-Zoom, V-Zoom, Native 16:10 Auto, Normal, 16:9, Full, Zoom, H-Zoom, V-Zoom, Native *The image shape may differ depending on the resolution of the input signal. Aspect ratio setting Description Auto...
Page 107: Changing The Color Mode
Parent topic: Using Basic Projector Features Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2.
Page 108: Turning On Auto Iris
Color Mode Description Multi-Projection Best for projecting from multiple projectors (reduces the color tone difference between images) * Available only when inputting RGB signals Note: The DICOM SIM Color Mode is for reference purposes only and should not be used to make medical diagnoses.
Page 109: Controlling The Volume With The Volume Buttons
4. Select the Auto Iris setting and select High Speed. Note: Select Normal for quieter performance. You can turn Auto Iris on or off for each Color Mode that supports the feature. 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Controlling the Volume with the Volume Buttons...
Page 110: Date And Time Settings
3. Select the Operation setting and press Enter. 4. Select the Date & Time setting and press Enter. You see a screen like this: 5. Select your date and time settings. Then select Set and press Enter to confirm your changes. 6.
Page 111 Settings Options Description Daylight Saving Time Daylight Saving Time Adjusts the daylight saving time settings DST Start Daylight Saving Time: enables or DST End disables daylight saving time DST Adjustment (min) DST Start and DST End: sets the date and time to start or end daylight saving time DST Adjustment (min): sets the difference between standard and...
Page 112: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projecting Two Images Simultaneously Using Multiple Projectors Saving Settings to Memory and Using Saved Settings Adjusting the Color Tone (Color Uniformity) Scheduling Projector Events...
Page 113: Stopping Video Action Temporarily
2. To turn the picture and sound back on, press the A/V Mute button again. Note: If you selected A/V Mute as the A/V Mute Release setting in the Extended menu, you can still control the projector while A/V Mute is enabled. Parent topic: Adjusting Projector Features Related references...
Page 114: Zooming Into And Out Of Images
Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen. 1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2.
Page 115: Projector Security Features
Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings. •...
Page 116: Setting A Password
Setting a Password To use password security, you must set a password. 1. Hold down the Freeze button on the remote control for about seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?".
Page 117: Selecting Password Security Types
Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use. If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or until the menu appears.
Page 118: Entering A Password To Use The Projector
Entering a Password to Use the Projector If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a password whenever you turn on the projector. You must enter the correct password to use the projector. 1.
Page 119: Saving A User's Logo Image To Display
• If you continue to enter an incorrect password many times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 120 2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image.
Page 121: Locking The Projector's Buttons
You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. You see a completion message. 9.
Page 122: Unlocking The Projector's Buttons
2. Select the Settings menu and press Enter. 3. Select Lock Setting and press Enter. 4. Select the Control Panel Lock setting and press Enter. Note: You can also press the left arrow button on the control panel to display the Control Panel Lock screen.
Page 123: Locking The Remote Control Buttons
Locking the Remote Control Buttons You can lock some of the buttons on the remote control. To lock the remote control buttons shown here, press and hold the Home button on the remote control for approximately 5 seconds. (To unlock the buttons, press and hold the Home button again for approximately 5 seconds.) Note: If you lock the remote control buttons, you can still reset the Remote Receiver setting in the Settings menu to the default settings.
Page 124: Installing A Security Cable
Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington lock. See your local computer or electronics dealer for purchase information. •...
Page 125: Projecting Two Images Simultaneously
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources next to each other. You can control the split screen feature using the remote control or the projector menus. Note: While you use the split screen feature, other projector features may not be available and some settings may be automatically applied to both images.
Page 126: Using Multiple Projectors
2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute, and press Enter. (You can also change image sources, if necessary.) 4.
Page 127: Multiple Projector Adjustment Overview
Projector Identification System for Multiple Projector Control Matching the Image Colors Parent topic: Adjusting Projector Features Multiple Projector Adjustment Overview If you are combining images from multiple projectors, you can adjust the brightness and color tone difference between each image. Note: You can display a pattern to aid in adjusting the projected image.
Page 128: Setting The Projector Id
Parent topic: Using Multiple Projectors Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter. 4.
Page 129: Matching The Image Colors
2. Set the remote control ID switch to On. 3. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. Note: If you don't know the projector's ID, hold down the ID button and press the Home button to temporarily display the projector's ID on the screen.
Page 130: Saving Settings To Memory And Using Saved Settings
4. Select the Color Matching setting and press Enter. You see this screen: Note: Press Enter to toggle between the projected image and the adjustment screen. 5. Set the Adjustment Level setting to 1 and press Enter. 6. Set the remote control ID to match the second projector. 7.
Page 131 2. Press the Menu button. Note: You can also press the Memory button on the remote control to access the Memory menu directly. 3. Select the Settings menu and press Enter. 4. Select the Memory setting and press Enter. You see this screen: 5.
Page 132: Adjusting The Color Tone (Color Uniformity)
Parent topic: Adjusting Projector Features Adjusting the Color Tone (Color Uniformity) You can use the Color Uniformity feature to manually adjust the color tone balance in the projected image. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3.
Page 133 You see this screen: 5. Press Enter and select On. 6. Press Esc. 7. Select the Adjustment Level setting and press Enter. 8. Press the right and left arrow buttons to adjust the level, then press Esc. 9. Select the Start Adjustments setting and press Enter. 10.
Page 134: Scheduling Projector Events
11. Select the color (Red, Green, or Blue) you want to adjust, and use the left arrow button to weaken the color tone and the right arrow button to strengthen the color tone. 12. Press Esc. 13. Repeat steps 10 and 11 for each area you want to adjust. 14.
Page 135: Viewing Scheduled Events
8. When you are finished, select Save and press Enter. 9. To schedule more events, repeat the previous steps as necessary. 10. Select Setup complete and select Yes to save your changes. Parent topic: Scheduling Projector Events Viewing Scheduled Events You can view any currently scheduled events.
Page 136: Copying Menu Settings Between Projectors
1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Schedule Settings setting and press Enter. You see a screen like this: 4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit.
Page 137: Saving Settings To A Usb Flash Drive
Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: •...
Page 138 2. Insert the flash drive into the wireless LAN module port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 139: Transferring Settings From A Usb Flash Drive
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the On/Standby light turns blue and the projector enters standby mode. Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector.
Page 140 2. Insert the flash drive into the wireless LAN module port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 141: Saving Settings To A Computer
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector. 5. Once the projector enters standby mode, remove the flash drive. Parent topic: Copying Menu Settings Between Projectors Related references Projector Light Status Saving Settings to a Computer...
Page 142 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 143: Transferring Settings From A Computer
The projector enters standby mode. Parent topic: Copying Menu Settings Between Projectors Related references Projector Light Status Transferring Settings From a Computer After saving projector settings to a computer, you can transfer them to another projector of the same model. Your computer must be running one of the following operating systems: •...
Page 144 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 145 • Mac: Drag the removable disk icon for your projector from the desktop into the trash. All the lights start flashing to indicate that the projector's settings are being updated. When the lights stop flashing, the On/Standby light turns blue and the projector enters standby mode. Caution: Do not unplug the power cord while the lights are flashing.
Page 146: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Projector Information Display - Info Menu...
Page 147 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.
Page 148: Image Quality Settings - Image Menu
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
Page 149 Setting Options Description White Balance Color Temp. Adjusts the overall tint of the image G-M Correction Color Temp.: sets the color tone Customized based on color temperature G-M Correction: higher values tint the image blue and lower values tint the image red Customized: lets you adjust the offset and gain of each color R (red), G (green), and B (blue)
Page 150: Input Signal Settings - Signal Menu
Setting Options Description Auto Iris Adjusts the projected luminance based on the image brightness Normal when certain Color Modes are High Speed selected Normal: for standard brightness adjustment High Speed: to adjust brightness as soon as the scene changes Note: The Noise Reduction setting is not available if you have selected an interlaced (480i/576i/1080i) input signal.
Page 151 Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
Page 152 Setting Options Description Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically Blanking Hides an area of the projected image that you select using the Bottom arrow buttons Left Right Advanced Video Range Sets the video range to match the setting of the device...
Page 153: Projector Feature Settings - Settings Menu
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Geometry Correction H/V-Keystone Adjusts the projected image shape Quick Corner H/V Keystone: lets you manually Arc Correction correct the angles of the horizontal and vertical sides Quick Corner: select to adjust the position of the four corners...
Page 154 Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to HDMI Link control HDMI-connected devices Power On Link that support the CEC standard Power Off Link Device Connections: lists the devices connected to the HDMI Link Buffer ports HDMI Link: enables or disables...
Page 155 Setting Options Description Power Consumption Normal Selects the brightness mode of the projector lamp Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Remote Receiver Front/Rear Limits reception of remote control signals by the selected receiver;...
Page 156: Projector Setup Settings - Extended Menu
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Home Screen Home Screen Auto Disp. Select various options for the projector's Home screen Custom Function 1 Home Screen Auto Disp.: Custom Function 2 controls whether the Home...
Page 157 Setting Options Description Projection Front Selects the way the projector faces the screen so the image is Front/Ceiling oriented correctly Rear Rear Ceiling Operation — See the Operation settings table in this topic A/V Settings A/V Output Selects various audio and video output settings Monitor Out A/V Output: select to output...
Page 158 Setting Options Description Standby Mode Communication On Enable this setting to allow the following operations to occur Communication Off when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) •...
Page 159 Setting Options Description Multi-Projection Projector ID Select various options when projecting from multiple Geometry Correction projectors Color Mode Projector ID: sets the projector Color Matching to a particular ID number which allows you to use a remote Color Uniformity control to individually control RGBCMY projectors Geometry Correction: corrects...
Page 160 Setting Description Menu Position Selects the position of the projector menu displayed on the screen Message Position Selects the position of messages displayed on the screen Messages Controls whether messages are displayed on the screen Display Background Selects the screen color or logo to display when no signal is received Startup Screen Controls whether a special screen appears when the projector...
Page 161 Remote Control Type: select Normal to use the remote control that came with the projector, or Simple to use a different Epson projector remote control and disable the remote control that came with the projector Beep: controls the beep that sounds when you turn the...
Page 162: Projector Network Settings - Network Menu
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting Options Description Screen Mirroring Turns on screen mirroring mode (PowerLite 5520W/5530U/5535U) Screen Mirroring Info Display Name Displays screen mirroring status...
Page 163 Gateway Address MAC Address IPv6 Address Display the QR Code — Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app Network Configuration Accesses additional network Configures your network settings menus Parent topic: Adjusting the Menu Settings...
Page 164: Projector Information Display - Info Menu
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note: The lamp usage timer does not register any hours until you have used the projector for at least 10 hours.
Page 165 Lamp Hours Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Version Main Displays the projector's firmware...
Page 166: Event Id Code List
Event ID Code List Parent topic: Adjusting the Menu Settings Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. Event ID code Cause and solution 0020...
Page 167 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. 089A The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly.
Page 168: Projector Reset Options - Reset Menu
Event ID code Cause and solution 0920 The internal power supply that saves your clock settings is running low. Contact Epson for help. Parent topic: Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All Config option on the Reset menu.
Page 169 • Color Uniformity • Memory • Color Matching Parent topic: Adjusting the Menu Settings...
Page 170: Maintaining And Transporting The Projector
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.
Page 171: Cleaning The Projector Case
Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Page 172: Cleaning The Air Filter
Related references Projector Light Status Cleaning the Air Filter You need to clean the projector's air filter in the following situations: • The filter or vents get dusty. • You see a message telling you to clean it. • The projector's Filter light flashes orange. 1.
Page 173 3. Pull the air filter out of the projector. 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable.
Page 174 5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 6. Place the air filter back in the projector as shown and push gently until it clicks into place. 7.
Page 175: Replacing The Air Filter
Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table.
Page 176 3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5.
Page 177: Projector Lamp Maintenance
Related references Optional Equipment and Replacement Parts Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following occurs: •...
Page 178 3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover, and then remove the lamp cover. Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury.
Page 179 5. Hold the lamp by its handle and gently pull it out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6.
Page 180 Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 7. Push in the lamp firmly and tighten the screws to secure it. 8. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Page 181: Resetting The Lamp Timer
Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related references Optional Equipment and Replacement Parts Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
Page 182: Replacing The Remote Control Batteries
Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
Page 183 3. Insert the batteries with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 184: Transporting The Projector
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
Page 185: Solving Problems
• The Help option on the Home screen can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
Page 186: Projector Light Status
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. On/Standby (power) light Status light Lamp light Temp (temperature) light...
Page 187 Flashing Flashing A fan or sensor has a problem. blue orange Turn the projector off, unplug it, and contact Epson for help. Flashing Orange Projector has overheated and blue turned off. Leave it turned off to cool down for five minutes.
Page 188 • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Flashing Orange Low air flow through the projector. blue •...
Page 189 • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Varies Varies Varies...
Page 190: Using The Projector Help Displays
Related tasks Turning Off the Projector Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Home button on the remote control. 3.
Page 191: Solutions When No Image Appears
Solutions When No Image Appears If no image appears, try the following solutions: • Press the A/V Mute button on the remote control to see if the image was temporarily turned off. • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
Page 192: Displaying From A Pc Laptop
• Press the Home button on the remote control to select from a list of available sources (shown in black text). • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. •...
Page 193: Displaying From A Mac Laptop
Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1. Open the System Preferences utility and select Displays. 2.
Page 194: Solutions When Only A Partial Image Appears
Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Press the Auto button on the remote control to optimize the image signal. • Make sure you selected the correct Screen Type setting for the screen you are using. •...
Page 195: Solutions When The Image Contains Noise Or Static
Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: •...
Page 196: Solutions When The Image Brightness Or Colors Are Incorrect
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen, and directly in front of it. •...
Page 197: Solutions To Sound Problems
• If the image has been progressively darkening, you may need to replace the projector lamp soon. Parent topic: Solving Image or Sound Problems Related concepts Projector Connections Projector Placement Projector Lamp Maintenance Related references Input Signal Settings - Signal Menu Image Quality Settings - Image Menu Solutions to Sound Problems If there is no sound when you expect it or the volume is too low or high, try the following solutions:...
Page 198: Solving Projector Or Remote Control Operation Problems
Remote Receiver setting is turned on in the projector's menu, if available. • The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. Parent topic: Solving Projector or Remote Control Operation Problems...
Page 199: Solutions To Problems With The Remote Control
• Make sure the Control Communications or Extron XTP setting in the Extended menu is set to Off if you are using the optional remote control cable set. • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic:...
Page 200: Solutions To Password Problems
• If you set a Web Control password and forgot the user ID or password, try entering the following: • User ID: EPSONWEB • Default password: admin • If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering the following: • User ID: EPSONREMOTE •...
Page 201: Solving Network Problems
• Connect no more than three devices that support HDMI Link at the same time. • If you have connected a speaker or receiver, set the output to PCM. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projector Feature Settings - Settings Menu Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network.
Page 202: Solutions When Network Alert E-Mails Are Not Received
Setting Up Projector Network E-Mail Alerts Related topics Using the Projector on a Network Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at epson.com/support (U.S.),...
Page 203 Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Page 204: Technical Specifications
Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution PowerLite 5510: 1024 × 768 pixels (XGA) PowerLite 5520W: 1280 × 800 pixels (WXGA) PowerLite 5530U/5535U: 1920 × 1200 pixels (WUXGA)
Page 205 Contrast ratio 15000:1 with Auto Iris on, Dynamic color mode, Normal Power Consumption mode, and Wide Zoom mode Image size PowerLite 5510: (in native aspect ratio) 30 inches (0.76 m) to 300 inches (7.62 m) PowerLite 5520W/5530U/5535U: 50 inches (1.27) to 300 (7.62) inches...
Page 206: Projector Lamp Specifications
Zoom ratio PowerLite 5510: (Tele-to-Wide) 1.0 to 2.0 PowerLite 5520W/5530U/5535U: 1.0 to 1.8 Internal sound system 10 W monaural Noise level 38 dB (Normal Power Consumption mode) 28 dB (ECO Power Consumption mode) Keystone correction angle Vertical: ± 30º Horizontal: ± 30º...
Page 207: Projector Dimension Specifications
Projector Dimension Specifications Height (excluding feet) 5.3 inches (134 mm) Width 18.6 inches (472 mm) Depth 12.6 inches (320 mm) Weight PowerLite 5510: 14.7 lb (6.7 kg) PowerLite 5520W/5530U/5535U: 15.2 lb (6.9 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency...
Page 208: Projector Environmental Specifications
Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 411 W ECO Power Consumption mode: 309 W Standby: 2.33 W (Communication On), 0.34 W (Communication Off) Parent topic: Technical Specifications Projector Environmental Specifications Temperature Operating: Up to 4921 feet (1500 m): 32 to 113 °F (0 to 45 °C) 4921 feet (1500 m) to 10000 ft (3048 m): 32 to 104 °F (0 to 40 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity (relative, non-...
Page 209: Supported Video Display Formats
For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 210 Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (1080i) 50/60 1920 × 1080 HDMI and HDBaseT*** input signals 640 × 480 SVGA 800 × 600 1024 × 768 WXGA 1280 × 800 1366 × 768 WXGA+ 1440 × 900 WXGA++ 1600 ×...
Page 211 Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (1080p) 24/30 1920 × 1080 * Wide resolution only for PowerLite 5520W/5530U/5535U ** PowerLite 5520W/5530U/5535U only *** HDMI connection using HDBaseT transmitter for PowerLite 5520W/5530U/5535U only **** Compatible only with VESA CVT-RB (Reduced Blanking) input signal for PowerLite 5530U/5535U Parent topic: Technical Specifications...
Page 212: Notices
Open Source Software License Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic:...
Page 213: Important Safety Instructions
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
Page 214 • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 20 inches (50 cm) of space between the projectors to allow for proper ventilation.
Page 215 Doing so may cause an unstable display and could lead to projector damage. Do not use or store the projector where it may be exposed to sudden changes in temperature. • Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time.
Page 216: Restriction Of Use
Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability.
Page 217 Symbol Approved Standards Description IEC60417 Caution, hot surface No.5041 To indicate that the marked item can be hot and should not be touched without taking care. IEC60417 Caution, risk of electric shock No.6042 To identify equipment that has risk of electric shock.
Page 218 Symbol Approved Standards Description — Positioning of cell To identify the battery holder itself and to identify the positioning of the cell(s) inside the battery holder. IEC60417 Protective earth No.5019 To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth electrode.
Page 219 Symbol Approved Standards Description ISO 3864 Contact prohibition To indicate injury that could occur due to touching a specific part of the equipment. — Never look into the optical lens while the projector is on. — To indicate that the marked item don’t place anything on projector.
Page 220: Fcc Compliance Statement
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 221 If you desire to receive the source code of the GPL Programs, contact Epson. These GPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Page 222 Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it.
Page 223 Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
Page 224 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
Page 225 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
Page 226 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Page 227 We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, please contact Epson. These LGPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 228 The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs. LGPL Programs • glibc 2.17 • SDL-1.2.15 • SDL-Image • alsa-lib-1.0.27.2 • libdbus-c++-0.9.0 • grencode-3.4.2 • libnl-3.2.24 •...
Page 229 change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights.
Page 230 non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software.
Page 231 copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
Page 232 version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.
Page 233 You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
Page 234 a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.
Page 235 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
Page 236 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
Page 237 The "BSD License" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of BSD License programs • tcpdump-4.2.1 • libpcap-1.2.1 License terms of conditions of each program which are provided by owner of the copyright to the "BSD License"...
Page 238 List of libjpeg programs • libjpeg-6b • libjpeg-8b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright (C) 1994-1997, Thomas G. Lane. This file is part of the Independent JPEG Group's software. For conditions of distribution and use, see the accompanying README file.
Page 239 These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it.
Page 240 List of libpng programs • libpng-1.2.49 • libpng-1.2.44 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows. This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail.
Page 241 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs...
Page 242 A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.
Page 243 Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler;...
Page 244 newlib This projector product includes the open source software program "newlib" which applies the terms and conditions provided by owner of the copyright to the "newlib". The "newlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of newlib programs •...
Page 245 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 246 (4) Advanced Micro Devices Copyright 1989, 1990 Advanced Micro Devices, Inc. This software is the property of Advanced Micro Devices, Inc (AMD) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by AMD.
Page 247 To anyone who acknowledges that this file is provided "AS IS" without any express or implied warranty: permission to use, copy, modify, and distribute this file for any purpose is hereby granted without fee, provided that the above copyright notice and this notice appears in all copies, and that the name of Hewlett-Packard Company not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
Page 248 Copyright 2002 SuperH, Inc. All rights reserved This software is the property of SuperH, Inc (SuperH) which specifically grants the user the right to modify, use and distribute this software provided this notice is not removed or altered. All other rights are reserved by SuperH.
Page 249 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (14) Alexey Zelkin Copyright (c) 2000, 2001 Alexey Zelkin <phantom@FreeBSD.org> All rights reserved.
Page 250 EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 251 ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (18) Citrus Project Copyright (c)1999 Citrus Project, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Page 252 FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF...
Page 253 Copyright (c) 2001 Mike Barcroft <mike@FreeBSD.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 254 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. iconv (Charset Conversion Library) v2.0 (28) Artem Bityuckiy (--enable-newlib-iconv) Copyright (c) 2003, Artem B. Bityuckiy, SoftMine Corporation. Rights transferred to Franklin Electronic Publishers.
Page 255 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED...
Page 256 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 257 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Page 258 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (37) MIPS Technologies, Inc * Copyright (c) 2009 MIPS Technologies, Inc.
Page 259 List of MIT License programs • jquery-1.7.2.min.js • jquery-ui-1.8.20 • jquery.ui.touch-punch.js • jquery.upload-1.0.2.min.js • jquery-1.11.3.min.js • jquery-ui-1.11.4 • expat-2.0.1 • jansson-2.4 License terms of conditions of each program which are provided by owner of the copyright to the "MIT License" are as follows. Copyright ©...
Page 260 List of TOPPERS/JSP programs • jsp-1.4.3 License terms of conditions of each program which are provided by owner of the copyright to the "TOPPERS/JSP" are as follows. TOPPERS/JSP Kernel Toyohashi Open Platform for Embedded Real-Time Systems/Just Standard Profile Kernel Copyright (C) 2000-2003 by Embedded and Real-Time Systems Laboratory Toyohashi Univ. of Technology, JAPAN Copyright (C) 2004 by Embedded and Real-Time Systems Laboratory Graduate School of Information Science, Nagoya Univ., JAPAN.
Page 261 Note: The TOPPERS License has been revised several times; what is shown above is the latest version that is to be applied to software made public hereafter. TINET This projector product includes the open source software program "TINET" which applies the terms and conditions provided by owner of the copyright to the "TINET".
Page 262 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (6) TINET and TOPPERS TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep. of Computer Science and Engineering Tomakomai National College of Technology, JAPAN The above copyright holder, limited to cases in which one satisfies conditions (1) ~ (4) below, or the conditions described in Version 2 of the GNU Public License officially announced by the Free Software...
Page 263 List of WPA Supplicant programs • wpa_supplicant-2.3 License terms of conditions of each program which are provided by owner of the copyright to the "WPA Supplicant" are as follows. Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi> and contributors All Rights Reserved. This program is licensed under the BSD license (the one with advertisement clause removed).
Page 264 The "lighttpd" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of lighttpd programs • lighttpd-1.4.35 License terms of conditions of each program which are provided by owner of the copyright to the "lighttpd"...
Page 265 License terms of conditions of each program which are provided by owner of the copyright to the "PCRE" are as follows. PCRE LICENCE ----------- PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language.
Page 266 Written by: Zoltan Herczeg Email local part: hzmester Emain domain: freemail.hu Copyright(c) 2009-2012 Zoltan Herczeg All rights reserved. THE C++ WRAPPER FUNCTIONS ----------- Contributed by: Google Inc. Copyright (c) 2007-2012, Google Inc. All rights reserved. THE "BSD" LICENCE ----------- Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 267 FastCGI This projector product includes the open source software program "FastCGI" which applies the terms and conditions provided by owner of the copyright to the "FastCGI" The "FastCGI" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of FastCGI programs •...
Page 268 List of OpenSSL programs • OpenSSL 1.0.2g • openssl-1.01t License terms of conditions of each program which are provided by owner of the copyright to the "openssl" are as follows. LICENSE ISSUES =========================================== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit.
Page 269 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;...
Page 270 THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 271 National Center for Supercomputing Applications University of Illinois at Urbana-Champaign http://www.ncsa.uiuc.edu Permission is hereby granted, free of charge, to any person obtaining a copy of this software (Iperf) and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 272 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction =========== The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
Page 273 -------------- Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'.
Page 274 These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising -------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission.
Page 275: Binding Arbitration And Class Waiver
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,...
Page 276 Orange County, California, at your option. a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties agree to the following procedure: (i) Write a Demand for Arbitration.
Page 277 Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if any;...
Page 278: Trademarks
Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.
Page 279: A Note Concerning Responsible Use Of Copyrighted Materials
(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

This manual is also suitable for:

Powerlite 5530u Powerlite 5520w Powerlite 5535u

Epson PowerLite 5510 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Epson PowerLite 5510

Summary of Contents for Epson PowerLite 5510

This manual is also suitable for:

Table of Contents