Problems With The Image Or Sound - Epson PowerLite 5500C User Manual

Problems with the Image or Sound

An image does not appear on the screen.
Check that the power light is on and the lens cover is off. Also make
sure the cables are securely connected, as described in Chapter 1.
The correct image source may not be selected. Press the Source
button on the remote control or the control panel to choose another
image source.
Some screen savers appear as a blank screen. Make sure any screen
savers on your computer are disabled while using the projector.
Note: If the Source button is pushed to switch video input sources
and no source is connected, the projector enters a cool-down mode
(flashing orange power light) and then goes into sleep mode (steady
orange power light). Connect a video source, then press the Power
button to resume.
A screen saver appears on the screen and will not go away.
Press the ESC key, the right mouse button, or the top multi-purpose
button (if you are using the remote control as a mouse) to stop the
screen saver. This will also clear any effects you have on the
screen.You should disable any screen savers on your computer
before using the projector.
Problems with the Image or Sound
123