Connecting To A Pc Desktop Computer - Epson PowerLite 5500C User Manual

Connecting to a PC Desktop Computer

78
4 • Using the ELP Link III Software
The main cable included in your ELP Link III set connects the PS/2
mouse cable (needed to use the remote control as a mouse) and
9-pin serial cable (needed to use the ELP Link III software and the
Effects buttons on the remote control) from your computer to the
projector.
Mouse/Com port
1. If you connected the PS/2 mouse cable included with the
projector as described on page 22, disconnect it from the
computer and the projector.
2. Connect the round end of the main cable to the projector's
Mouse/Com port.
PS/2 mouse cable
9-pin serial cable
main cable