Safety Instructions
Follow these safety instructions when setting up and using the
projector:
1. Do not place the projector on an unstable cart, stand, or table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. If you
5. Place the projector near a wall outlet where the plug can be
6. Insert the projector's three-wire grounding-type plug into a
7. Take the following precautions for the plug. Failure to comply
8. Do not overload wall outlets, extension cords, or integral
are not sure of the power available, consult your dealer or power
company.
easily unplugged.
Placez l'imprimante près d'une prise de contacte où la fiche
peut être débranchée facilement.
properly grounded outlet. If you have a two-prong outlet,
contact an electrician to replace it. Do not hold the plug with
wet hands.
with these precautions could result in sparks or fire.
Do not insert the plug into an outlet with dust present.
Insert the plug firmly into the outlet.
convenience receptacles. This can cause fire or electric shock.
Safety Instructions
7