Installing The Software - Epson PowerLite 5500C User Manual

3. Connect one end of the Mac mouse cable included with the ELP
4. Connect the other end of the Mac mouse cable to the mouse port
5. Connect either end of the Mac serial cable to the SERIAL
6. Now install the software as described on page 87.

Installing the Software

ELP Link III software can be used with the following operating
systems:
Link III set to the MOUSE terminal on the square end of the
main cable.
on the back of the PowerBook.
terminal on the square end of the main cable. Connect the other
end of the Mac serial cable to the
on the back of your PowerBook.
Note: After you turn on the projector and computer, you may
need to choose Mirroring in the Display Control Panel to
display the image on the LCD screen as well as the projector
screen. See your Macintosh documentation for details. (This
step is not necessary on some newer systems, which can detect a
dual video signal.)
Windows 3.x
Windows 95
Windows 98
Windows NT 4.0
printer or modem port
Installing the Software
85