Inverting And Mirroring The Image; Selecting The Input Signal Setting - Epson PowerLite Cinema 500 User Manual

Inverting and Mirroring the Image

If the image is displayed upside-down or backward, select the correct Projection option:
1. Press the button on the remote control.
Menu
2. Use the menu navigation buttons to open the
menu, then open the
.
Projection
3. Choose from these options:
if the projector is located in front of the
Front
screen (for example, on a table).
Front/Ceiling
of the screen and mounted overhead.
if the projector is located behind the screen.
Rear
Rear/Ceiling
the screen and mounted overhead.

Selecting the Input Signal Setting

If you're using the projector's Input A or Input B port, select the correct setting for the type of
equipment you've connected to it:
1. Press the button on the remote control.
Menu
2. Use the menu navigation buttons to open the
menu, and then select
connected the equipment).
3. Choose from these options:
if your video player outputs an NTSC signal.
YCbCr
if your video player outputs an HDTV signal.
YPbPr
RGB-Video
if the image is coming from a computer.
RGB
Note: If you're unsure which setting to use, check the label next to the port on your video
equipment.
menu, and then select
Screen
if the projector is located in front
if the projector is located behind
or
Input A Input B
if your video player outputs an RGB video signal.
Setting
Menu
button
Menu
navigation
buttons
menu, then open the
Setting
(depending on the port to which you've
Displaying and Adjusting the Image
Input Signal
19