Displaying And Adjusting The Image; Focusing And Zooming The Image - Epson PowerLite Cinema 500 User Manual

Home theater projector

Hide thumbs Also See for PowerLite Cinema 500:

Table of Contents

Displaying and Adjusting the Image

Make sure your video or computer equipment is turned on, then turn on the projector as

described on page 21. If necessary, select the correct source to display the image (see page 22).

Note: If you turn on the connected equipment before starting the projector, the projector

automatically detects and displays the image. If you turn on the projector first, or have multiple

pieces of connected equipment, you may have to select the source manually.

If an image does not appear, check the troubleshooting tips on page 61.

Follow the steps below to adjust the sharpness or size of the image.

Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the

Pattern button on the remote control, then select Cross-hatching.

1. Press the

You see this screen:

2. Use the

Note: If you use the remote control, you can stand close to the screen while focusing the

image. This lets you adjust the picture more precisely.

3. Press

Displaying and Adjusting the Image

button on the projector or remote control.

Focus

Zoom

arrow buttons to adjust the image.

when done.

Table of Contents

500dn - b color inkjet printer