Solutions When You Cannot Use Two Screen Mirroring Sources; Solutions When The Image Or Sound Contains Static During Screen Mirroring Connection; Solutions When You Cannot Receive Shared Images - Epson EB-810E User Manual

Solving Network Problems
• Check the mobile device's settings.
• Make sure the settings on the mobile device are correct.
• When connecting again immediately after disconnecting, it may take some
time until the connection is established. Reconnect after waiting for a
while.
• Restart the mobile device.
• Once you have connected using Screen Mirroring, the projector
connection information may be recorded on the mobile device. However,
you may not be able to reconnect to the projector from the recorded
information. Select the projector from the list of available devices.
Related Links
g
• "Network Menu - Network Settings Menu"
• "Network Menu - Network Projection Settings"
Solutions When You Cannot Use Two Screen Mirroring
Sources
If you are unable to use two Screen Mirroring sources at the same time, try the
following solutions:
• Set the Interrupt Connection setting to Off.
Network > Network Settings > Network Projection > Screen Mirroring
s
Related Links
g
• "Network Menu - Network Projection Settings"
p.209
p.216
p.216
Solutions When the Image or Sound Contains Static
During Screen Mirroring Connection
If the displayed image or sound contains static when connecting using Screen
Mirroring, try the following solutions:
• Avoid covering the Wi-Fi antenna of the mobile device.
• If you use a Screen Mirroring connection and an internet connection at the
same time, the image may stop or contain noise. Disconnect the internet
connection to expand your wireless bandwidth and improve the connection
speed of the mobile device.
• Make sure the display contents meet the Screen Mirroring requirements.
• Depending on the settings of the mobile device, the connection may be lost
when the device enters power saving mode. Check the electrical power saving
settings on the mobile device.
• Update to the latest version of the wireless driver or firmware on the mobile
device.

Solutions When You Cannot Receive Shared Images

If you cannot receive shared images from other projectors, try the following
solutions:
• Connect the projector to the same network as the projector that is sharing
images.
• Make sure that the projector is not in Content Playback mode.
• Make sure the Screen Sharing setting is set to On.
Network > Network Settings > Network Projection > Screen Sharing
s
• Make sure that no other device is connecting to the projector using the Epson
iProjection software.
• If the firmware version amongst the projectors sharing the screen is not the
same, you may need to update the projector's firmware to share your screen.
258