• Make sure the Display Name in the screen mirroring settings does not include "-" or it may not display
correctly on your mobile device.
• Make sure the Operation Mode and Channel settings are correct for your mobile environment and try
connecting again.
• Make sure no other mobile device is connected to the projector using No Interruptions settings in the
Extended menu Meeting Mode settings.
• Make sure the mobile device settings are correct.
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and
try connecting again.
• Restart the mobile device.
• If you have previously connected to the projector using Screen Mirroring, the device may have saved
the previous connection information. Delete the saved information and connect to the projector from
the list of available devices.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Solutions When the Image Contains Static During Network Projection
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also make sure that they are not too
far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic:
Solutions When the Image or Sound Contains Static During Screen Mirroring
If the projected image or sound contains static during Screen Mirroring (Home Cinema 1080), try the
following solutions:
• Avoid covering the Wi-Fi antenna of the mobile device.
Solving Network Problems
Solving Network Problems
194