Inverting and Mirroring the Image
If the image is displayed upside-down or backward, change the Projection option:
1. Press the
2. Use the menu navigation buttons to open the
menu, then open the
Projection
3. Choose from these options:
■ Front
screen (for example, on a table).
■ Front/Ceiling
of the screen and mounted overhead.
■ Rear
■ Rear/Ceiling
Positioning the Image
If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to
adjust its position.
Note: You can display a test pattern to make adjustment easier. Press the Pattern button on the
remote control, then select Cross-hatching.
If you still need to raise the height of the image after using the vertical lens shift knob, lift the
front of the projector and rotate the adjustable feet until the image is positioned correctly.
You can also use the feet to correct the angle of the image if it's tilted.
22
button on the remote control.
Menu
menu and select
Screen
.
if the projector is located in front of the
if the projector is located in front
if the projector is located behind the screen.
if the projector is located behind the screen and mounted overhead.
Setting
Menu
button
Menu
navigation
buttons
Vertical lens shift knob
Horizontal lens shift knob
Adjustable feet