Sharing Emp Monitor Settings - Epson EMP-7950 User Manual

Monitoring and Controlling Projectors via a Network (for the EMP-7900)
The following IP Address Setup window will be
3
displayed.
You should make the following settings when manually
connecting a projector.
IP addressg Enter the IP address for the projector to be connected.
Adds the projector with the specified IP address to the
[Add] button
projector list display area.
Connects the projector with the specified IP address
[Connect] button
to the network.
[Cancel] button Cancels entry of the IP address.

Sharing EMP Monitor settings

A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.
1
The projectors that have been recorded will be
2
displayed in the projector list display area.
Projector EMP482800... PROJECTOR01 PROJECTOR02 PROJECTOR03
address... 192.168.0.8 169.254.10.176 169.254.10.177 169.254.10.178
Room202 Room301 Room302 Room303 Room401
169.254.207.65 169.254.207.66 169.254.207.67 169.254.207.68 169.254.207.69
Click [Import].
3
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been registered by
EMP Monitor will be displayed in the projector list display
area.
User's Guide
Indicates a projector that
has been found using
automatic search
Room201
169.254.207.64
Indicates a projector that has
been registered using EMP
Monitor, or that has been
manually registered using
EMP NetworkManager.
Indicates a projector that has
been registered by specifying
the IP addressg manually.
107