Epson EMP-7950 User Manual page 150

Saving a User's Logo
The image to be recorded and a selection marquee
4
box will be displayed, so move the marquee box to
select the part of the image to use.
Tilt the [ ] button on the remote control or press the [
[ ], [ ] and [ ] buttons on the projector's control panel to
select the part of the image to use as the user's logo, and then
press the [Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
[ESC]: Return [ ]: Move
TIP
User's logos can be saved at up to 480 × × × × 360 dots in size.
[Menu]: Exit
[ ]: Set
Select "Yes" at the confirmation screen, and then
5
press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel.
],
Select this image?
Select the zoom rate in the Zoom rate setting screen,
6
and then press the [Enter] button on the remote
control or the [Auto/Enter] button on the projector's
control panel.
Set the zoom rate.
Zoom rate:
User's Logo
YES NO
User's Logo
100% 200% 300%
User's Guide
149