Epson EMP-7950 User Manual page 71

Functions for Enhancing Projection
Once the settings have been made, select "Preset" in
2
the sub-menu and then press the [Enter] button on
the remote control or the [Auto/Enter] button on the
projector's control panel.
Video Position
Audio Tracking
Effect Sync.
Setting Brightness
User's Logo Contrast
Advanced1 Sharpness
Color Mode
Advanced2
Resolution
About
Reset All
Preset
Reset
[ ESC ]: Return [ ]: Select [
Select a number (1–10) for saving the settings.
3
Video
Audio
Effect 1
Setting 2
User's Logo
3
Advanced
4
Advanced2 5
About 6
Reset All 7
8
9
10
[ ESC ]: Return [ ]: Select [
Adjust
: 0000
: 0
+
: 0 -
:
Adjust
Auto Manual
: 0 +
-
Select [Presentation ]
: : Select
Manual
Auto
:
[ ]
Set
Execute
]: Set [Menu]: Exit
Preset
1280 x 1024
x
Set
x
Set
x
Set
x Set
x
Set
: x
Set
x
Set
:
x
Set
x
Set
x Set
]: Set [Menu]: Exit
TIP
The preset numbers that have an input resolution displayed have
already been set. If you select a preset number that has already been
set and use it to save the current settings, the existing settings in that
recording area will be overwritten.
Press the [Enter] button on the remote control or the
4
[Auto/Enter] button on the projector's control panel to
save the "Video" menu settings.
When the settings have been saved, the input resolution will
appear.
Remote control
TIP
• To clear the memorised details, select "Reset" from the "Video"
menu. Note that this will clear all of the preset settings.
• Preset recording is possible regardless of whether Wall Shot is on or
off. However, the Wall Shot settings are not memorised.
User's Guide
70