Assembly; Description; Unpacking - Craftsman 320.27245 Owner's Manual

The label on your tool may include the following symbols.
V..................................................... Volts
A .................................................... Amperes
Hz .................................................. Hertz
W................................................... Watts
min ................................................ Minutes
_, .................................................. Alternating current
no ................................................. No-load speed
[] ................................................... Class II construction
RPM .............................................. Revolutions or Strokes per minute
/'lk .......................................... Indicates danger, warning or caution.
It means attention! Your safety is involved.
IMPORTANT! READ ALL INSTRUCTIONS
UNPACKING
Your sabre saw has been shipped completely assembled as a barrel sabre saw, except for
the saw blade and top handle which are packed unassembled. Inspect the tool carefully to
make sure that no breakage or damage has occurred during shipping. If any parts are
damaged or missing, return the sabre saw to your nearest Sears Service Center to have
it replaced.
Z_ WARNING: If any parts are missing, DO NOT operate this tool until the missing
parts are replaced. Failure to do so cou d resu t in possibleserious personal injury.
Z_WARNING: Yoursabre saw should NEVER be connected to a power source when
you are assembling parts, making adjustments, installingor removing blades, cleaning or
when it is not in use. Disconnectingthe tool will prevent accidental starting that could
cause serious personal injury.
Before attempting to use any tool, be sure to familiarize yourself with all the operating
features and safety instructions.
9