Accessories; Extension Cords; Blades - Craftsman 320.27245 Owner's Manual

The following recommended accessories are currently available at your local Sears Store.
!_WARNING: The use of attachments or accessories that are not recommended I
might be dangerous and could result in serious injury.
I
EXTENSION CORDS
Sears offers a Large selection of extension cords that help extend your working range.
The use of any extension cord will cause some loss of power. To keep the loss at a
minimum and to prevent overheating, use an extension cord that is heavy enough to
carry the current that the tool will drew.
A wire gauge (AWG) of at least 14 is recommended for an extension cord 25 feet or
less in length. When working outdoors ALWAYS use an extension cord that is suitable
for outdoor use. The cord's jacket will be marked WA.
Z_CAUTION! Keep extension cords sway from the cutting area and position the
cord so it will not get caught on lumber, tools, etc. during the cutting operation..
I Z_WARNINGI Check extension cords before each use. If damaged, replace it I
I
immediately. NEVER use a tool with a damaged extension cord because touching
I
the damaged ares could cause electrical shock resulting in serious injury.
BLADES
Sears has a large selection of sabre saw blades for fast, efficient cutting in a variety of
materials and applications.
6-in. long, 7 teeth per in. Fast-cutting wood Blade
3 '/e-in. long, 10 teeth per in. Fine scrolling in wood
2 s/4-in, long, 20 teeth per in. Super-fine wood scrolling
3 %-in. long, 10 teeth per in. Super-fine wood scrolling
3 '/_-in. long, 8 teeth per in. Wallboard, plaster
2 s/4-in, long, 20 teeth per in. General metal cutting
3 %-in. long, 10 teeth per in. Bi-metal; general wood
3 %-in. long, 6 teeth per in. Bi-metal; fast-cut wood
2 s/4-in, long, 12 teeth per in. Bi-metal; general metal
3-in. long "Knife-edge'-linoleum, rubber, leather
Sears also offers Combination Squares, Framing Squares and various length Edge
Guides to help you with all your cutting needs.
24