Tool-Less Blade Installation; Removing The Blade - Craftsman 320.27245 Owner's Manual

2 in-1 handle scrolling sabre saw with laser trac
Table of Contents

Advertisement

Z_WARNING!
Failureto unplug the saw
from the power source when assembling parts, I
makingadjustments
or changingblades could
resultin accidental starting causing possible
seriousinjury.
TOOL-LESS BLADE
INSTALLATION (Fig. 6, 0)
The tool-less blade change controlallows
you to remove and replace the saw blade
quickly and easily withoutthe use of additional
tools.
1. Place your fingeron the lower edge of the
see-throughblade guard and pull forward
until it locks in place (Fig. 8).
2. Slide the tool-less blade-change cover up,
then insert the blade into the slot of tool-less
blade change holder (Fig. g).
3. Release the tool-less blade-change cover to
lock the blade in place.
4. Pull down on the blade to be sure the blade is
securely locked in place. Blade teeth should
be pointing forward and down.
NOTE: For use with both 'T' & 'U' shanked blades.
I FIg. 8
Fig. 9
REMOVING THE BLADE (Fig. 8, 9)
1. Unplug the sabre saw.
z_WARNING:
Failure to unplug the saw could result in accidental starting
causing possible serious personal injury.
2. Followsteps 1 through3 on tool-less blade installation(above).
3. Carefullyremovethe blade.
•/_ WARNING:
ALWAYS CLAMP WORKPIECE. Failureto clamp workpiececould result
in workpiece beingthrown or kickedback causing seriouspersonalinjury.
I
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents