Controls - Craftsman 113.234700 Owner's Manual

Controls
On-Off Switch
\
Rip Scale
Rip Lock
Rip Indicator
Bevel Index Pin
Yellow Key
Control
On-off Switch
Yellow Key
Elevation Handle
Rip Scale and
Rip Indicator
Rip Lock
Bevel Lock
Bevel Index Pin
Q
Bevel Lock
Pun_on
Turns motor on/off
Allows saw to be switched on
Lowers/raises radial arm
Tells distance between blade
and fence when saw is in rip
position
Frees carriage to move along
radial arm; locks at desired
position
Frees motor to rotate;
locks in desired position
After bevel lock is unlocked,
allows motor to rotate to in-
dexed positions at 0O,45°, 90°
Operation/Comment_
Pull on, push off
Requires yellow key
Insert into on-off switch,
remove after turning saw off
Turn clockwise to lower,
counterclockwise to raise
Move blade carriage along
arm to align line on indicator
with desired number on scale
Move clockwise to lock,
counterclockwise to unlock
Lock before ripping
Pull to unlock, push to lock
Works in combination whh
bevel index pin
Push to right and hold while
rotating motor, then release.
Then lock bevel lock
24