Carrier 33CS450-01 Owner's Manual page 71

Time-Based Control of the
l_ogrammable Ou_ut
To operate one of the MISC outputs using time-based operation, set
Advanced Setup step #30 (below) for Time 18:88. This extra output
will supply 24VAC to the selected MISC terminal, which is especially
useful for devices that require a start and stop time. Refer to page
14.4 - 14.5 for more details on programming this output.
Possible TIME scenarios:
1) An exterior lighting system that needs to be energized every
day between the hours of 8pm and 1am.
2) A sprinkler system that needs to be energized every day
between the hours of 2am and 4am.
Note Press the MODE
MOD_ _ Press the MODE button. While holding :
button momentarily
the MODE, press the PROGRAM to move through the
PROGRAM
( _ button to enter Setup screens.
setup screens.
Press
arid hold the MODE
button to move back-
Press the MODE button repeatedly wards through the
• . setup screens.
MOOe 0 until this setup screen appears. _
_, OFF _T}me
=/8:88_Temp = _'_ Aux ,_
18:88
...... 7_7
Press the UP button Lo _
set the programmable
output for time based
operation The digts n the Press
clock area wi[[ appear
/ MODE
thenextpage
Page 14.3