Carrier 33CS450-01 Owner's Manual page 66

Adjusting the Deadband
For more detailed information, please see the explanation on the
previous page.
Moo_ _ Press the MODE button. While holding
the MODE, press the PROGRAM Note: Press the MODE
button momentarily pgOGRAM button to enter Setup screens, to move through the
setup screens. Press
and hold the MODE
_3 Press the MODE button reoeatedlv \ button to move back-
Moo_ until this setup screen appears.-- "_ setupwardSscreens.thr°ugh the
Adjust the deadband 1_
(1"- 6°)
Press
Adjust the deadband
_ for the 2nd stage
(o °- i o °)
d 8?
Press
_¢_ Adjust the deadband
for the 3rd stage
(o °-1o °)
E Press
Press the PROGRAM button to leave the Setup screens If no buttons are
pressed, the display will leave the setup screens after 30 seconds
Page 13.5