Carrier 33CS450-01 Owner's Manual page 64

Adjusting the dycles Per Hour
The Cycles Per Hour setting limits the number of times per hour
your HVAC unit may energize. For example, at a setting of 6 cycles
per hour the HVAC unit will only be allowed to energize once every 10
minutes. The Cycles Per Hour limit may be overridden and reset by
pressing the UP or DOWN buttons on the thermostat.
Moo_ _ Press the MODE button. While holding
the MODE, press the PROGRAM Note: Press the MODE
button momentarily pROG_M button to enter Setup screens, to move through the
setup screens. Press
and hold the MODE
Press the MODE button repeatedly\ button to move back-
Meo_ until this setup screen appears. _,_ setupwardSscreens.thr°ugh the
Select the cycles per _Z_
d=cycles per hour
_, Hm,tdefeated i_l
dl=d + defeat 5 min
cempresser bckout _ _ s
_ L_ PRO_M @
(df,d, 2_6)
Press the PROGRAM button to leave the Setup screens. If no buttons are _
pressed, the display will leave the setup screens after 80 seconds
Page 13.3