Xantrex GRIB and Ethernet interface Operating Manual page 62

Troubleshooting
Table A-2 Troubleshooting for ENET Communication
The power supply is not
responding.
A-4
The communication port on the
power supply unit is not selected
properly.
The address of the power supply
unit is not valid. The address has
not been selected using the
.
<address>
Select "ENET" as the
communication port.
Refer to the correct power supply
address using the front panel.
*ADR
See the XG 850 Watt Series
Programmable DC Power Supply
Operating Manual (Part number:
M370078-01), Chapter 5: Remote
Interface Addressing for a detailed
explanation on how to use the
*ADR command.
M370078-06