Tilt Stop Collars
Note: The tilt scale reads "0" when the blade is 90° to the
table.
Tools Needed
Setting 90° Stop Collar
1.
2.
3.
Figure 88
Note: If adjustments are made to the 90° stop
collar in the following steps, make sure the tilt
indicator arrow shown in Figure 89 points to the
0° mark on the scale when the table is at 90°
with the blade. If it is not, loosen the button head
screw that secures the indicator, then adjust it and
re-tighten the screw.
4.
5.
Figure 90
Qty
Figure 88.
Figure 89.
Figure 90.