Figure - Shop fox W1824 Owner's Manual

Ripping
To make a rip cut, do these steps:
1. Preventing Kickback
2.
3.
4.
5.
6.
7.
8.
9.
Note: The jointed edge of the workpiece must slide
against the fence during the cutting operation.
10.
Page 9
ON

Figure 45

Never attempt to rip a workpiece that
does not have one perfectly straight
edge on it. Always place the straight
edge against the rip fence. Failure to
do this could result in kickback and
serious personal injury.
Figure 45.
Keep the blade guard installed and in
the down position. Failure to do this
could result in serious personal injury
or death.
Turn OFF the saw and ALWAYS allow
the blade to come to a complete stop
before removing the cut-off piece.
Failure to follow this warning could
result in serious personal injury.