Blade Installation
To install the blade, do these steps:
1.
2.
Before proceeding with the next step, wear leather
gloves to protect your hands while handling and
installing the blade.
3.
4.
5.
6.
Figure 35
Figure 36
The arbor nut is self-tightening by
design when a cut is made. When
installing the blade, only tighten the
arbor nut so that it firmly holds the
blade in place. Overtightening the
arbor nut may lead to nut and arbor
failure which could cause metal debris
to be thrown from the saw.
Figure 35.
Figure 36.