Shop fox W1824 Owner's Manual page 41

Cutting Rabbets with a Standard Blade
To cut rabbets with the standard blade, do these steps:
1.
2.
3.
4.
5.
6.
7.
Figure 58
Page 25
Figure 57
Figure 58.
DO NOT place a tall board on edge to
perform a rabbet cut with a standard
blade. Workpieces that are too tall
to be properly supported with the
fence can easily shift during operation
and cause kickback. Instead, place the
stock flat on the saw and perform the
rabbet cut with a dado blade.
Blade
Figure 57.
Blade