Table of Contents
Advertisement
Service Information
Timer recording is not possible.
Clock is not set to correct time.
Set clock to correct time.
Timer has not been programmed
Reprogra_a timer.
correctly.
TIMER SET is not on in VCR message
Press TIMi-'R to set VCR into Timer
center,
mode.
Tuning Problems
Some channels axe skipped over when
Those channels axe preset to be skipped.
Restore ci_annels to channel search
sequence; select SAVED next to
scanning channels.
channel Skipped]Saved.
Channel cannot be switched.
VCR set to Timer mode.
Press TIMFR to release VCR from
Timer M_:le.
Picture and sound are weak or missing.
Antenna cable is loose.
Tighten cc,nnections or replace cable.
Maintenance
Automatic Head Cleaning
Your video recorder has a built-in head cleaner that automaticallly cleans the _6deo head drum assemb-
ly whenever a tape is loaded or unloaded. This Auto Head Cleaner reduces head clogging.
Video Head Cleaning
After long periods of use, the video heads may become clogged with accumulated
dirt, causing distor-
tion. When this occurs, use do-it-yourself wet head cleaning cassettes available through your Zenith
dealer.
CALrHON:
Do not use dry head cleaning systems. They may seriously damage both the video recorder
and cassette. When visual signs appear (snow, streaking in picture and horizontal pulling of picture) in-
dicating the need for video head cleaning, please see your Zenith approved selvice center.
Cabinet Cleaning
The outside surfaces of the video recorder may be cleaned with a soft lint-free cloth as required.
Use
care not to scratch the VCR message center window during cleaning.
2613-o
13 - 2
Advertisement
Table of Contents
