Zenith VRL4170 Operating Manual & Warranty page 32

VCR Plus Setup
Example: Listed/Cable Company Assigned
Numbers
(°
Listed "IV
Channels
2
3
4
Assigned
Channels
\
Before Channel
Mapping
(Enter Cable
Company
Assigned
Channels)
EXAMPLE: Channel Mapping For CINEMAX
Listed TV Assigned
Channels Channels
47
CINEMAX
cable system, to receive Cinemax you would have
to "assign" Channel 16 on the Listed TV Channels
number 45 line. (See examples above.) If several
different cable companies service your local
broadcast area, each cable company's assigned
q,"v"channel numbers may be different for each
cable company. The VCR cannot be programmed
at the factory with the multitude of cable
companys' TV channels for a given local broad-
cast area; you have to determine and enter these
cable company's TV assigned channel numbers
manually during the Channel Mapping Proce-
dure. Use the worksheet provided on the next
page.
This will complete the VCR Plus Setup Proce-
€lure. You are now ready to record programs
using VCR Pluscodes. (See Page 10-1.)
Notes:
If you entered 99 for you_-MFR number you will
have to manually select each channel you wish to
record at the cable box..
If you move to a different location, a different
broadcast area, do the Channel Mapping proce-
dure over.
If you do not do the Channel Map procedure the
broadcast you record may be from a different sta-
tion than the one you intended.
To change Channel Mapping information in the
VCR's memory press OH MAP, select 2-CH Map
Review, make the necessary adjustments.
"To find out which publications in your area carry the
PlusCode '= numbers, please call 1 800-2584-827"
VCR Plus-- and Plus Code are trademarks of Gemstar Development Corp.
VCR Plus-- system ts manufacturecl unOer license from
Gemstar Development Corporation.
VCR Plus+ et Plus Code sont des rnarclues de Gemstar Development Corp.
Le syst_me VCR Plus+ est fabnque'sous licence de
Gemstar Development Corporation..
::6_yo 11- 4