Table of Contents
Advertisement
For WEEKL_Yrecording
: To record a q-v program
at the same time on the same channel every week
(Example: every Monday)
Press the STOP (down)
button until "EVRY" and
your desired day of Lhe
week appear together.
Then, press the FFWD
button•
]IMER
pRO_RAMMIN
G
CH GATE
_FGrN
END
_i_
_!_i_;
! _
•
Press the PLAY or STOP
button until the desired hour
appears.
(Example: "7, PM" for
7:30PM)
Then, press the EFWD button.
TIMER
PROGRAMMING
OH DATE
BEGIN
END
_!/_
.:_
!
!:
i!;
_¸
Press the RFWD or REW button. The program is
now completed.
Te set another program, repeat steps [2] to [10],
,_ Press the MENU button to return to original mode.
Press the PWR button to set automatic timer
recording The TIMER REC indicator ligllts up
_"You must turn off the TVNCR to activate
automatic timer recording.
If power is not turned off and you continue
watching TV, "TIMER REC STANDBY" starts
flashing on the TV screen 2 minutes before
the programmed start time.
;
i
Press the PLAY or STOP
button until the desired
minute appears.
(Example: "30" for 7:30PM)
Then, press the RFWD
button.
"f
TIME R PROGRA'_iMING
CH DATE
BEGIN
END
Press the PLAY or
STOP
l CHOATE B EGIN END
button until the desired hour
appears. (Example: "8, PM"
_,, ,.,_ ........ _2:;:_
for 8:50PM)
__
Then, press the F.FWD
....
button,
;(
,
Press the PLAY or STOP
button until the desired
minute appears.
(Example: "50" for 8:50PM)
Then, press the RFWD
button.
_i
!:
,
!
Press the PLAY or STOP
button until the desired tape
speed appears•
(Example: SP)
t
/
cll
GAlE
BEGrN
END
NOTE:Any timer recording that is in progress
while you perform the following adjustments will
continue recording undisturbed.
To set the schedule of a timer recording forward:
1) If television is OFF, press the PWR button to
turn it ON.
2) Press the MENU button• Use the PLAY or
STOP button to move selection arrow to
TIMER PROGRAMMING.
Press the F.FWD
button to enter the TIMER PROGRAMMING
screen.
3) Press the REC button once to enter the
adjustment mode, then use the PLAY or
STOP button to select the recording you want
to adjust.
4) Press the REC button to set the scheduled
BEGIN and END time forward 10 minutes.
Each ar_ditional press will set the time forward
anotr,er 10 minutes. (If you choose a
recording currently in progress, the BEGIN
time will not be affected.) While performing
this procedure, you may cancel the new
set[ing and return to the original one by
pressing the PAUSE/S'[ ILL button.
NOTE:If you choose a recording currently in
progress, the recording speed will automatically
be set to SLP to preserve tape length.
5) Press the F.FWD or REW button to exit the
adjustment mode Then press the MENU but-
ton to exit the TIMER PROGRAMMING
screen
6) If desired,
press the PWR button
to turn the
television
OFF
- 26 -
Eiq
8L02
Advertisement
Table of Contents
