Timer; Automatic Timer Recording - Zenith TVSC1320 Operating Manual & Warranty

TIMER
You may set the TV/VCR to start and end a
recording while you are away. You can set 8
programs to record on specific days, daily or
weekly within a 1 year period.
The example to the right shows how to set the
timer to record channel 7 on July 6th, 2000 from
7:30 PM to 8:50 PM at SP tape speed.
Make sure:
• If a cable or satellite converter is connected to
the TV/VCR, you must set the channel you
want to record on the converter (The TV/VCR
should always be set to channel 3 or 4).
• Clock must be set to the correct time and date
before setting the timer.
• TVNCR must be turned on to program it.
• Insert a cassette tape with its erase prevention
tab in place, If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.
Avoid overlapping of programs
Programs with overlapping starting times may
result in some of the programs not recording•
When programs overlap:
• The program with the earliest starting time has
recording priority.
• Once the program with the earliest starting time
finishes, recording then proceeds according to
the sequence in which the programs were
entered.
• tn the example below, the first 11/2hours of
Program 3 were not recorded. The first half-
hour was pre-empted by Program 2, which had
the earliest starting time. The next hour was
pre-empted by Program 1, which was the first
program entered into the recording sequence.
RecordingSequence
Program 1 i
10:00AM-11:00AM
Program 2 i
9:00AM-10:00AM
Program 3 I :
9:30AM-12:00PM [ ,.
9:00AM 10:00AM 11:00AM 12:00PM
*Recording period is SHADED
;t ' FiPiER p';_O:._i:_At,,_r, Jllrqc;
Press the MENU button on /
the remote control.
Confirm "TIMER
PROGRAMMING" is pointed /
by pressing the PLAY button. /
Then press the F.FWD
button.
-MENU
I=. TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET Up
USERS SET UP
V CHiP SET UP
LANGUAGE ENGLISH I
CAPTION [O_F]
ZERO RETURN
TIME SEARCH
• If you have not yet set the clock, "MANUAL
CLOCK SETTING" appears. If so, follow steps
[3] to [8] on page 16. Then set the timer
recording.
Press the PLAY or STOP
button to select the desired
program position.
Then, press the F,FWD
button.
riMER PROGRAMMING
CH DAlE BEGIN EN,'3
. TIMER PROGRAMMING
CH DATE BEGIN END
L
Press the PLAY or STOP
button until the desired
channel number appears.
(Example: CHT)
Then, press the EFWD
button.
Remember: If the TV/VCR is connected to a
cable box or satellite box, the TV/VCR must be on
CH3 or CH4, then the channel to be recorded is
selected on the cable box or satellite box.
For ONCE recording :
Press the PLAY (up)
button until the desired
date appears. (Example:
"7/06" for July 6th). Then,
press the EFWD button.
- TIMER PROGRAMMtNG - 1
CH DATE BEGIN END
:: :i:: :: :_:::i:: ::
,-o_ _!_!_ _Y U.: ::: ::
For EVERY DAY recording : To record a TV
program at the same time on the same channel
every day (Example: Monday f- T_MERPROORAMM_.G
through Sunday). | c. °ATE_EG,.E.O
Press the STOP (down) /
button until "EVRY DAY" |. ,,,E_,._.,_, : :
appears. Then, press the |
F.FWD button. [
- 27 - EN
9K16