Zenith TVSB1320 Operation Manual & Warranty page 15

Set the clock accurately for proper automatic timer
recording. If a Public Broadcasting Station (PBS) is
available in your area, follow "AUTO CLOCK
SETTING". If there isn't one, then follow
"MANUAL CLOCK SEFrlNG".
AUTO C!.OC_ :_.TTt_4G
You can have the TV/VCR set the clock time and
date automatically via the Extended Data
Service (XDS) of your local Public Broadcasting
Station (PBS) channel.
Make sure:
• Use the remote control for this procedure.
• TVNCR power must be turned on.
• Antenna connectionsare correct.
• Cable converter box is turned on if your
TV/VCR is connected to one.
• The channel is properly set in advance. (See
page 14.)
NOTES:
• Auto clock setting only needs to be set once.
But it can be done again if the clock's time
has become incorrect for some reason.
• tf the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS
station must be selected on the cable box
itself. The TV/VCR must be set to the output
channel of the cable or satellite box (usually
channel 3 or 4), to be able to set up or correct
the clock automatically,
• The TV/VCR cannot control the channels of the
cable or satellite box.
Press the MENU button.
Press the PLAY or STOP
button to point to "SETTING
CLOCK".
Then, press the EFWD
button.
MENU
TIMER pROGRAMMING
PICTURE CONTROL
_- SETTING CLOCK
CHANNEL SET LIp
USER'S SET Up
LANGUAGE ENGLISH
CAPTION O_F
ZERO RETURN
TIME S_ARCH
_- AUTO CLOCK !i)Nf
Press the F.FWD or REW AUTOCLOC*C,IA_Tb}
button repeatedly until [ON] UANUALCLOO_S_
appears, oST [OFF]
: [ ........ ,- " ' , :4. ,.
Press the PLAY or STOP - S_,.GCLO_*
AUTO CLOCK [ON]
I
button to point to "AUTO . _UTO CLOt* C.I' '_
CLOCK CH". .... /
J
Then press the F.FWD or M_,U_CLOC* SET
REW button until the ,_os7 io_q
channel number for your local PBS station
appears.
Leave menu set to [AUTO] if you do not know the
local PBS channel number. The TV/VCR will
automatically search all available channels and
select it.
Press the MENU button to return to TV mode.
:. 1._< Oi ! J.
Turn the TV/VCR off. The Auto Clock functions
automatically when the TV/VCR is off.
If you choose [AUTO]:
• The TV/VCR must scan each channel for a
couple of seconds to determine if it is
transmitting an XDS signal.
• If the time automatically set by [AUTO] is
incorrect, it may have accessed the XDS
signal from a PBS channel outside your time
zone. In this case, you must manually enter
the correct PBS channel,
• tf [AUTO] cannot locate a XDS signal, you
must set the c!ock manually.
- 15- EN
8L02